Details
Bbr, Equestrian Knight Badge Cotton Shorts
Fabric Selection:
Made of lightweight cotton fabric, high-density cotton fiber is used to achieve internal and external differentiation in a single-layer fabric. The outer plain weave is compact and wear-resistant, and the inner layer is formed into a short and dense suede through a sanding process. The dense plain weave structure is wind-resistant and splash-resistant, the sanded suede surface is skin-friendly, and the short suede is treated with static elimination to avoid adhesion to the skin. A very small amount of grooved polyester moisture-conducting yarn is embedded in the cotton fiber, which quickly guides sweat from the inner suede surface to the outer layer for evaporation through the capillary effect, solving the problem of sultry suede.
Suede foaming printing process:
Use polyurethane foaming slurry containing thermal expansion microcapsules, and expand the pattern area through high-temperature hot pressing at 150 degrees to form a three-dimensional raised structure with a thickness of about 0.6mm. The surface is electrostatically flocked and covered with cotton suede to form a velvety touch. At the same time, adjust the concentration of the foaming agent and the heating time to achieve thickness differences in different areas of the pattern and enhance the visual level.
Size: S-Xl
Fabric Selection:
Made of lightweight cotton fabric, high-density cotton fiber is used to achieve internal and external differentiation in a single-layer fabric. The outer plain weave is compact and wear-resistant, and the inner layer is formed into a short and dense suede through a sanding process. The dense plain weave structure is wind-resistant and splash-resistant, the sanded suede surface is skin-friendly, and the short suede is treated with static elimination to avoid adhesion to the skin. A very small amount of grooved polyester moisture-conducting yarn is embedded in the cotton fiber, which quickly guides sweat from the inner suede surface to the outer layer for evaporation through the capillary effect, solving the problem of sultry suede.
Suede foaming printing process:
Use polyurethane foaming slurry containing thermal expansion microcapsules, and expand the pattern area through high-temperature hot pressing at 150 degrees to form a three-dimensional raised structure with a thickness of about 0.6mm. The surface is electrostatically flocked and covered with cotton suede to form a velvety touch. At the same time, adjust the concentration of the foaming agent and the heating time to achieve thickness differences in different areas of the pattern and enhance the visual level.
Size: S-Xl
Reviews
Tags
TAGS:
Similar Products
